VALVES

Home Valves

Automat’s Valves enable correct air and water control and increase the efficiency and performance of your irrigation system. Else – your system can be affected by pressure fluctuations, water hammer which can damage pumps, break pipes and decrease flow of water and affect performance and efficiency. Install Automat’s Valves in your irrigation system and save water, energy and achieve better irrigation quality.

Filter Backwash Hydraulic Valves

Our extremely durable, hard-working Ball Valve offering is a critical component in completing assembly of pipe systems engineered and designed to last over ten . . . .

Know More >>

A 6'' inch, one-piece body that is lever operated, provides smooth functioning and helps in uniform water distribution. A strong grip of rubber seal ensures...

Know More >>

Extending the range of control valve, Automat has a new addition of 3” and 4” control valves combined with innovative “Curved Bridge*” design and performance which caters to a diversied range of irrigation application. . . .

Know More >>

Easily divert flow of water through pipelines with the 3 way Ball Valve (Line Changer). Suitable for piping systems that require partial or full diversion of water from one pipe or two different pipes....

Know More >>

Single and double union PP ball valves that are ideal for drip and mini sprinkler systems. The ball inside the valve is made of special material that provides smooth and leakage-proof performance...

Know More >>
Single union PVC ball valves-compressed

Our extremely durable, hard-working Ball Valve offering is a critical component in completing assembly of pipe systems engineered and designed to last over ten . . . .

Know More >>
DOUBLE

Our extremely durable, hard-working Ball Valve offering is a critical component in completing assembly of pipe systems engineered and designed. . . .

Know More >>

Our extremely durable, hard-working Ball Valve offering is a critical component in completing assembly of pipe systems engineered and designed . . . .

Know More >>

Our extremely durable, hard-working Ball Valve offering is a critical component in completing assembly of pipe systems engineered and designed to last over ten years plus in harsh conditions . . . .

Know More >>

One-piece body made of U-PVC, disc design ensures low torque and low pressure loss. Butterfly valve suited for water application in irrigation and also suitable .

Know More >>

Body made of high quality PVC for strength and chemical resistance. Disc made of stainless steel (SS304/316) for higher pressure rating and even.

Know More >>

Multi-turn, linear motion throttle valve. Straight through flow with minimal head loss, its slow operation prevents water hammer. Float, body inside profile. . . .

Know More >>

Suitable for high-flow applications – installed in lines where conventional ball and other irrigation valves are difficult to install and operate. With medium. . .

Know More >>

Allows the flow of water in one direction to avoid the reverse flow during the closure of pump. . . .

Know More >>

Suitable for installation between flanges, the wafer swing check valves have compact dimensions. The wafer swing check valves are easy to . . . .

Know More >>

Cast iron ball check valve is recommended for agriculture irrigation systems as a safety valve to prevent the water hammer and to maintain water . . . .

Know More >>

Used on the end of suction line to stop fluids in the line emptying when the pump is turned off, thus eliminating the need to prime the pump during start-up. . . .

Know More >>

Hydraulically operated valve for green house irrigation system as well as turf and field crop irrigation. . . .

Know More >>

Quick coupling valves allow hoses to be quickly connected to an underground irrigation supply pipe. They are normally located under a valve box and are. . . .

Know More >>
Brass-QCV

Quick coupling valves allow hoses to be quickly connected to an underground irrigation supply pipe. They are normally located under a valve box and are used for hand. . . .

Know More >>

Designed for three hydraulic flow control positions with common port at base of the valve body. Three hydraulic positions – open....

Know More >>

Designed for three hydraulic flow control positions with common port at base of the valve body. Three hydraulic positions – open....

Know More >>

Highly recommended in micro/drip irrigation systems as a safety valve to prevent the water hammer and to maintain water column in delivery pipe. To be used . .

Know More >>

Needle valves are used to control flow in delicate gauges which might be damaged by sudden surges of fluid under pressure. Also useful in situations...

Know More >>

The Brass Drain Valve helps prevent damage to your irrigation system due to freezing by automatically draining sprinkler lines when the water is turned off... The Drain Valves.

Know More >>

Thoughtfully designed, skillfully engineered products for micro-irrigation systems that deliver best-in-class performance in the most challenging conditions

Contact Us

  • Plot no. 18-19, Dilshad Garden, G.T. Road, New Delhi 110095.
  • Phone: +91-9650607154
  • WhatsApp: +91-9650607154
  • Fax +91 11 43099807/ 2212 1035
  • marketing@automatworld.com, contactus@automatworld.com

Download Mobile App

app-store
play-store

Copyright © 2024 Automat Industries Private Limited
All rights reserved.